The dress size calculator at 85b.org is now able to calculate your top and skirt size.

The calculator accepts three measurements: bust, waist & hips. If you fill in all three, your dress size will be calculated. If you fill in bust and waist but leave the hips field empty, your top size will be calculated. If you fill in waist and hips and leave the bust field empty, your skirt size will be calculated.

This could be a very useful calculator: Dress Size Calculator

The International Dress Size Calculator now accepts measurements in either inches or centimeters.

Please try it at International Dress Size Calculator

Work has started (at long last) on the Dress Size Calculator.

As of 22nd May I will make this new tool available at 85b.org : Dress Size Calculator.

The initial version accepted only imperial measurements (inches) but this has now been expanded to include centimeter measurements.

Please use the calculator and leave feedback in comments on this post.

Please remember that this is a very early beta release and that improvements will be made - your feedback is invaluable for this purpose.

Also, if you would like to see new features added, this is the place to ask.

Thanks.

There are three approaches for size-labeling of clothes:

• body dimensions: The product label states for which range of body dimensions the product was designed. (Example: bike helmet labelled “head girth: 56–60 cm”, shoe labeled “foot length: 28 cm”)
• product dimensions: The label states characteristic measures of the product. (Example: jeans labeled with their inner-leg length in centimeters or inches, i.e. not the – several centimeters longer – inner leg length of the intended wearer)
• ad-hoc size: The label provides a size number or code with no obvious relationship to any measurement. (Example: Size 12, XL)

Traditionally, clothes have been labeled using many different ad-hoc size systems. This approach has led to a number of problems:

• Country-specific or even vendor-specific labels create additional costs.
• Ad-hoc sizes have changed with time, often due to “vanity labelling”, an inflation in body dimensions associated with a size, to avoid confronting aging customers with uncomfortable anthropometric truths.
• Mail-order purchasing requires accurate methods for predicting the best-fitting size.
• Many garments need to be selected based on two or three body dimensions to fit adequately, and not a single scalar.
• Scalar ad-hoc sizes based on 1950s anthropometric studies are no longer adequate, as changes in nutrition and life styles have shifted the distribution of body dimensions.

Therefore, the European standards body CEN started in 1996 the process of designing a new modern system of labeling clothes sizes, resulting in the standard EN 13402 “Size designation of clothes”.

It is based on:

• body-dimensions
• the metric system (SI - The International System of Units (abbreviated SI from the French language name Système International d’Unités))
• data from new anthropometric studies of the European population performed in the late 1990s
• similar existing international standards (ISO 3635, etc.)

The EN 13402 standard consists of four parts:

1. EN 13402-1: Terms, definitions and body measurement procedure
2. EN 13402-2: Primary and secondary dimensions
3. EN 13402-3: Measurements and intervals
4. EN 13402-4: Coding system

EN 13402-1: Terms, definitions and body measurement procedure

The first part of the standard defines the list of body dimensions to be used for designating clothes sizes, together with an anatomical explanation and measurement guidelines:

head girth : maximum horizontal girth of the head measured above the ears

neck girth : girth of the neck measured with the tape measure passed 2 cm below the Adam’s apple and at the level of the 7th cervical vertebra

chest girth : maximum horizontal girth measured during normal breathing with the subject standing erect and the tape-measure passed over the shoulder blades (scapulae), under the armpits (axillae), and across the chest

bust girth : maximum horizontal girth measured during normal breathing with the subject standing erect and the tape-measure passed horizontally, under the armpits (axillae), and across the bust prominence (preferably measured with moderate tension over a brassiere that shall not deform the breast in an unnatural way and shall not displace its volume)

underbust girth : horizontal girth of the body measured just below the breasts

waist girth : girth of the natural waistline between the top of the hip bones (iliac crests) and the lower ribs, measured with the subject breathing normally and standing erect with the abdomen relaxed

hip girth : horizontal girth measured round the buttocks at the level of maximum circumference

height : vertical distance between the crown of the head and the soles of the feet, measured with the subject standing erect without shoes and with the feet together (for infants not yet able to stand upright: length of the body measured in a straight line from the crown of the head to the soles of the feet)

inside leg length : distance between the crotch and the soles of the feet, measured in a straight vertical line with the subject erect, feet slightly apart, and the weight of the body equally distributed on both legs

arm length : distance, measured using the tape-measure, from the armscye/shoulder line intersection (acromion), over the elbow, to the far end of the prominent wrist bone (ulna), with the subject’s right fist clenched and placed on the hip, and with the arm bent at 90°

hand girth : maximum girth measured over the knuckles (metacarpals) of the open right hand, fingers together and thumb excluded

foot length : horizontal distance between perpendiculars in contact with the end of the most prominent toe and the most prominent part of the heel, measured with the subject standing barefoot and the weight of the body equally distributed on both feet

body mass : measured with a suitable balance in kilograms

EN 13402-1 pictogram example

These dimensions are meant to be measured preferably without or as few as possible clothes.

All body dimensions are measured in centimeters, except for the body mass.

The standard also defines a pictogram that can be used in language-neutral labels to indicate one or several of the above body dimensions.

EN 13402-2: Primary and secondary dimensions

The second part of the standard defines for each type of garment one “primary dimension”. This is the body measure according to which the product must be labelled.

For some types of garment, a single measure may not be sufficient to select the right product. In these cases, one or two “secondary dimensions” can be added to the label.

The following table shows the primary and secondary dimensions listed in the standard. Secondary dimensions are shown in parenthesis.

EN 13402-3: Measurements and intervals

The third part of the standard defines preferred numbers of primary and secondary body dimensions.

The product should not be labeled with the average body dimension for which the garment was designed (i.e., not “height: 176″). Instead, the label should show the range of body dimensions from half the step size below to half the step size above the design size (e.g., “height: 172-180″).

For heights, for example, the standard recommends generally to use the following design dimensions, with a step size of 8 cm:

For trousers, the recommended step size for height is 4 cm:

The standard defines similar tables for other dimensions and garments, only some of which are shown here.

Men

The standard sizes and ranges for chest and waist girth are:

The above table is for drop = -12 cm, where

drop = waist girth - chest girth.

Example: While manufacturers will typically design clothes for chest girth = 100 cm such that it fits waist girth = 88 cm, they may also want to combine that chest girth with neighboring waist girth step sizes 84 cm or 92 cm, to cover these drop types (-16 cm and -8 cm) as well.

The standard also suggests that neck girth can be associated with chest girth according to this table:

The standard further suggests that arm length can be associated with height according to this table:

Women

Dress Sizes

The standard sizes and ranges for bust, waist and hip girth are:

EN 13402-1 pictogram example for dress size 88-72-96

Bra Sizes

The standard sizes for brassiere are:

EN 13402-1 pictogram for bra size 70B

The secondary dimension cup size can be expressed in terms of the difference

cup size = bust girth - underbust girth

and can be labeled compactly using a letter code appended to the underbust girth:

Example: Bra size 70B is suitable for women with underbust girth 68-72 cm and bust girth 84-86 cm.

Letter codes

For clothes where a larger step size is sufficient, the standard also defines a letter code. This code represents the bust girth for women and the chest girth for men. The standard does not define such a code for children.

Each range combines two adjacent size steps. The ranges could be extended below XXS or above 3XL if necessary.

EN 13402-4: Coding system

The fourth part of the standard is still under review and is expected to be published in early 2006. It describes a compact coding system for clothes sizes. It is mostly intended for industry to use in databases and as a part of stock-keeping identifiers and catalogue ordering numbers. Writing out all the centimetre figures of all the primary and secondary measures from EN 13402-2 can in some cases require up to 12 digits. The full list of centimeter figures on the pictogram contains a lot of redundancy and the same information can be squeezed into fewer digits with lookup tables. EN 13402-4 defines several such tables. They list all in-use combinations of EN 13402-3 measures and assign a short 2- or 3-digit code to each.

Tags: clothes, size, EN 13402